Gypsum-cornices.com  NEW BRAND

Gypsum-cornices.com NEW BRAND

Arabic
English
Products Category
News

• FRP(fibreglass reinforced plas • The method of improve the stre • China get back in the plasterb • How to choose gypsum plaster c • Building gypsum powder in the

Contact Us

Name: Micheal
Tel: 0086 20 66692370
Fax: 0086 20 62614092
Mobile: 0086 135 7001 4940
E-mail: sales@gypsum-cornices.com
Add: Room 603,huaqiao commercial building,longgui,baiyun area,Guangzhou,China
MSN: micheal-62@hotmail.com Skype: micheal-62 点击这里给我发消息 点击这里给我发消息

Partners
Baidu.com Google.com ALI sunyoung plaster cornice
Products

Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould

Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould
Product name锛Glassfibre Reinforced plastic moulds for Gypsum cornice making/cornice mould
Item锛A080
Price锛$20-$80
Details锛


The vedio of plaster cornice moulding making by fiberglass mold




Fiber Glass Reinforced Plastic moulds for making gypsum cornice/cornice mould


1.strength in third dimention with clear flower pattern
2. finely carved by the OTR-3TDSCAN

3.it doesn’t get distorted and shrink after using a long time.

Plz click here to download our catalogue:
Catalogue of gypsum cornice from Guangzhou Xingyang 2013.pdf 

 

Process of gypsum cornice production by using fiberglass mold
materials should be prepared in advance:

fiberglass mold, scraper, worktable, water, glass fiber, gypsum powder, release oil, brush, shovel, agitation barrel (with volume of 11 liters), plastic rope


6 steps to make gypsum cornice by using fiberglass mold:

Step1 :brush release oil

      brush release oil on mold gently.

Step 2: pour gypsum slurry

      In order to obtain the best gypsum cornice with smooth surface, it needs to touch the mold back and forth for several times while pouring slurry for the first time.

Step 3: spread glass fiber

       Wash hands clean and then grab some glass fiber to spread on the mold evenly. After that, press glass fiber with slurry pouring on them and flatten the surface. Trim glass fiber in order to make them all be put on the centre of mold.

Step 4: tie a rope

       Tie up a pinch of glass fiber with a rope on the end of mold and then flatten the surface with a scraper. Wash the scraper clean after that.

Step 5: shovel plaster off the edge of mold

       When shovel plaster off the edge of mold, the angel between wrist and the side of mold should be 45 degrees.

Step 6: release gypsum cornice from mold

After 30 minutes later, hold the rope with one hand and carry one side of cornice with the other hand to pull up gypsum cornice from mold. Finally, gypsum cornice production is finished.
  1. cornice mould Product introduction:Glassfibre Reinforced plastic moulds for Gypsum cornice making

Nowadays, the world has entered an environmental epoch. It is no doubt that the gypsum products have taken the place of other decorative materials for the exploding market demand. To satisfy the different customer requirements and create a clear and green home for you, we will continue to research and develop more & quality GRG moulds.

Our GRG moulds are produced by selected superior UPR (unsaturated polyester), reinforced with the steel frame at the backside, and finely carved by the OTR-3TDSCAN.It is smooth in the surface, strength in third dimention with clear flower pattern. Meantime, it doesn’t get distorted and shrink after using a long time. The mould drawings from customers are also warmly welcomed.

Materials:The Glassfibre Reinforced plastic moulds is made by glass fibre , resin and steel frame.

Advantages: compare to rubber silicon molds,it will not to expand when hot and to shrink when cold

Service life:3-5 years,

 

2. method of application:

Preparing well moulds mix--- starch--- spread mould oil --- starching cover the mould ---spread the fiber glass well-distributed--- starching cover the fiber glass --- collect the fiber glass by hand cover it completely ---press mould till it shape- up ---demould ---drying---packing

If you interested welcome contact us sent you the video or watch in on our Alibaba website.

 1.jpg2.jpg

 

 

3.the picture of moulds:

 3.jpg4.jpg5.jpg

2011-37.jpg2011-3.jpg2011-4.jpg2011-22.jpg2011-29.jpg

 

 

 front side of mouldsfront side.jpg

 

back side of moulds

back side 2.jpgback side.jpg

 

4.package by wooden crate/box.

Each 20"container could be loaded in 600-1000 pc moulds

  6.jpg

 

5.payment terms:30% T/T AS DEPOSIT,,BALANCE BEFORE SHIPMENT

MOQ:50 PCS

 

6.Factory view:

 

7.jpg
cornice mould

鈫怺Previous锛欴052]

Related Products :
back side of corner mold
JF2085
back side of corner mold
Glassfibre Reinforced plastic moulds for Gypsum cornice making
D052
Glassfibre Reinforced plastic moulds for Gypsum cornice making
the profile of cornice mold
A2085
the profile of cornice mold
scraper blade - used for cornice back side shape making
A2085
scraper blade - used for cornice back side shape making
the back side of cornice mould
A2085
the back side of cornice mould
wooden crate packing of cornice mould
A2085
wooden crate packing of cornice mould
back side of medallion mold
A2085
back side of medallion mold